Switching The Picture Displayed On The Monitor Screen - Sony Ipela PCS-XC1 Operating Instructions Manual

Switching the Picture Displayed on the
Monitor Screen
You can display the pictures on the local and remote sites on the monitor
screen at the same time. This enables you to check how your own party is
monitored on the remote site.
1
Press the LAYOUT button on the Remote Commander.
The Layout menu appears.
Layout
Screen Display Patterns
Stop Broadcast
2
Use the V, v, B or b button on the Remote Commander to select one of the
screen display patterns, then press the ENTER button.
You can select from among the following eight patterns:
Full: Displays the remote picture in full screen.
PandP: Displays the remote picture on the left of the screen in large size
and the local picture on the right in small size. (If a computer is
connected to the system, the computer screen will appear at the bottom
right.)
Side by Side: Displays the remote and local pictures side by side.
PinP: Displays the local window picture in the remote full picture.
You can select the location of the window picture from among five
patterns.
Note
During a multipoint conference, you can broadcast local video to the connected host
terminal.
Self Broadcast: Send request to broadcast local video to host terminal.
114

Switching the Picture Displayed on the Monitor Screen

Full PandP
PinP PinP
Side by Side PinP
PinP PinP
Terminal
0
Save Cancel