Sony Ipela PCS-XC1 Operating Instructions Manual page 108

4
Use the V, v, B or b on the Remote Commander to select "New Entry",
then press the ENTER button.
The Preset Save menu appears.
5
Use the V, v, B or b button on the Remote Commander to select "Preset
Number", then select the number to which the setting is stored.
Only the numbers that have not been used for presetting are selectable.
6
Use the V, v, B or b button on the Remote Commander to select
"Adjustments" under "Camera Angle", then press the ENTER button, if
you want to adjust the camera zoom and angle.
The Adjustments menu is displayed and you can adjust the zoom and
angle.
For the adjustment procedures, see "Adjusting the Camera Angle and
Zoom" on page 104.
7
After the adjustment is finished, press the RETURN button or the ENTER
button on the Remote Commander.
The Preset Save menu is restored.
8
When you want to register a thumbnail, use the V, v, B or b button on the
Remote Commander to select "Thumbnails" and press the ENTER button
to check the checkmark for "Register in Thumbnail/List".
The currently displayed image will be registered as the thumbnail.
108
Adjusting the Camera
Adjustments > Preset Setting List
Local Camera : First Camera
New Entry
Back to Home
1 2
4 5
Adjustments > Preset Save
Preset Number 1
Adjustments
Camera Angle
Register in Thumbnail/List
Thumbnails
Save
3
6
Cancel