System Installation
Desktop Installation
Place the unit on a flat surface.
Notes
• Do not grasp the unit by the camera head when carrying the unit.
• Do not turn the camera head by hand. Doing so may result in a camera malfunction.
Using a Tripod
Use a screwdriver to tighten the tripod attachment screw while using the
following as a guide for the amount of protrusion (4) from the attachment surface.
Caution
Do not install the unit in high locations (shelves, ceilings, etc.) when using a tripod
screw.
14
System Installation
4 = 4.5 – 7 mm
4 = 0.18 – 0.27 inches