Capturing The Screen - Sony Ipela PCS-XC1 Operating Instructions Manual

Capturing the Screen

You can capture the image displayed on the screen by using "Screen Capture"
in the Tools menu and display the captured image on the Phone Book. The
captured image is stored on the USB storage device.
To capture the local image
1
Insert a USB storage device on which you want to save the captured image
into the USB port on the unit.
Note
Do not connect small USB devices to the USB port on the front of the unit, as they
may become impossible to remove. Connect small devices to the USB port on the
rear of the unit.
2
Display the image you want to capture on the monitor screen.
For details on adjusting the camera, see "Adjusting the Camera" on page
104.
3
Press the TOOLS button on the Remote Commander, or press the V, v, B
or b button to select "Tools" in the Home menu and press the ENTER
button.
The Tools menu appears.
4
Press the b button on the Remote Commander, and select "Execute" for
"Screen Capture" with the V, v, B or b button then press the ENTER
button.
The image displayed on the monitor is captured and stored on the USB
storage device.
For the procedure how to display the captured image on the Phone Book,
see "Registering a New Remote Party" on page 92.
116
Capturing the Screen
Tools
Presentation
Home
Streaming
Recording
Annotation
Icon display
Screen Capture
Memory Stick
Machine Status
Setup
Execute
[Suspended]
[Suspended]
Execute
[Suspended]
Execute
[Suspended] Execute
On
Execute