Audio Setup Menu; Audio Mode - Sony Ipela PCS-XC1 Operating Instructions Manual

transmitted and received, transmission and
reception will be at a maximum of 60 frames
per second.
Communication
SIP: Mode
Communication Bit Rate
Allows you to select the communication bit
rate per point
You can select from among 128Kbps,
384Kbps, 512Kbps, 768Kbps, 1Mbps,
2Mbps, 3Mbps, 4Mbps and Other.

Audio Mode

Allows you to select the compression format
of audio to be sent to a remote party.
You can select from among G.728, G.722
and G.711.
Note
When the remote system does not support the
audio mode selected by the local site, the mode
automatically becomes "G.711".
Screen Size
Allows you to select the screen size of the
picture to be transmitted or received.
You can select from among 720, W4CIF,
W432P, WCIF, 4CIF, CIF, QCIF and
AUTO.
Video Mode
Allows you to select the compression format
of pictures to be transmitted or received.
You can select from among H.263+, H.264
and MPEG4.
Video Frame
Allows you to select the number of video
frames during transmission or reception.
15fps: Send pictures at a maximum rate of
15 frames per second.
30fps: Send pictures at a maximum rate of
30 frames per second.
60fps: Send pictures at a maximum rate of
60 frames per second.
AUTO: Switch the number of frames
automatically.

Audio Setup Menu

The Audio setup menu is used to set various
audio items.
Audio1
Basic Setup1
Input Select (MIC)
Allows you to select the microphone and/or
external equipment from which an audio
signal is input.
MIC: Select this to use of the microphone
(supplied) connected to the MIC jack on
the unit.
Echo Canceller
Allows you to select whether to use the
internal echo canceller.
On: Enables the internal echo canceller.
Off: Disables the internal echo canceller.
Lip Sync
Allows you to select whether to use the
Sync function.
Auto: Enables the Lip Sync function.
Off: Disables the Lip Sync function.
Notes
• When "Adaptive Rate Control (ARC)",
"Packet Resend Request (ARQ)" or
"Forward Error Correction (FEC)" is set to
"On" in the QoS setup menu, you cannot set
"Lip Sync" to "Off".
• When "Lip Sync" is set to "Off", you cannot
change the setting for "Adaptive Rate
Control (ARC)", "Packet Resend Request
(ARQ)" or "Forward Error Correction
(FEC)" in the QoS setup menu.
Audio2
Basic Setup2
Audio Input Delay Setting
Allows you to set Audio Input Delay to
synchronize the audio with the video input.
Default –100ms: Selects the default delay
minus 100ms.
Default –50ms: Selects the default delay
minus 50ms.
Default: Selects the default delay.
Registering Local Information
Lip
47