Day & Night - Wirepath Surveillance WPS-550-DOM-A-WH Installation Manual

WPS-550-DOM-A Installation Manual
HLC (High Light Compensation) Setting
The HLC function is used to cut off exceptionally bright light, such as
vehicle headlights. Sensitivity can be adjusted based on the scene.
• LEVEL: Adjust the HLC LEVEL from
0 to 255. The larger the value,
the more sensitive the camera
will be to bright lights.
• MODE: HLC can be set to operate
ALL DAY or only when the camera
is in Black and White (B/W) mode
(NIGHT ONLY).
DAY & NIGHT
The camera allows for different configurations for Day
and Night surveillance. Set DAY&NIGHT value to COLOR,
EXT, AUTO, or B/W based on the installation application.
• AUTO: The camera uses the lens to
determine color or B/W. When in
AUTO mode, the camera automatically
switches to B/W when lighting levels are
low, and back to color when they
increase.
• COLOR: The camera remains in color all
of the time.
• B/W: The camera remains in black and white (B/W) all of
the time.
• EXT: This mode uses the external IR sensor in the camera to
switch to color or B/W. This is the recommended setting.
AUTO Setting
When setting the DAY/NIGHT mode to
AUTO, the camera uses the lens to detect
the Lux rating of the picture and switches to
color or B/W automatically.
18
HLC
LEVEL --------|-------200
MODE ALL DAY
RETURN RET
SETUP
LENS
EXPOSURE
WHITE BAL.
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
RESET
EXIT
DAY NIGHT AUTO

D N LEVEL --------|--------091

D N DELAY 1 SEC

N D LEVEL ---|-------------046

N D DELAY 5 SEC
RETURN RET
MANUAL
AWCSET
OFF
AUTO