Camera Operation Setup; Focus, Zoom And Position; Using The Test Adapter - Wirepath Surveillance WPS-565-DOM-A Installation Manual

WPS-565-DOM-A Installation Manual

5. Camera Operation Setup

5.1. Focus, Zoom and Position

The lens of the camera has manual focus and zooms knobs for setting the
correct field of view and the gimbal may be rotated for tilt correction. Connect
the test adapter as described below to use a monitor at the camera location for
viewing adjustments.

5.2. Using the Test Adapter

Connect the red power
plug to a 12V DC, 500mA
minimum power supply.
10
Focus
(Front)
Zoom
(Rear)
Connect to the "Test
Adapter" plug above.
Rotate and Pivot Gimbal
(Loosen/tighten pivot setscrew
Test Adapter
as needed, not shown. )
Connection
Test Adapter Connector
Use the center button to
navigate the OSD menu
structure.
Connect the yellow BNC
adapter to a video monitor to
view the menu.
Use a BNC-RCA adapter to connect
to a TV's yellow "Composite" input.