Advanced Ip Settings - Https Access Setup; Created Request; Installed Certificate; Connection Types - Wirepath Surveillance WPS-300-BUL-IP Installation Manual

WPS-300-BUL-IP Installation Manual

9.3.2. Advanced IP Settings - HTTPS Access Setup

Accessing the Camera through HTTPS provides an additional security level for the video stream by requiring certificate
authentication. To use this feature, a certificate must be created and then verified by a third party. To set up HTTPS access
correctly, contact the HTTPS verifier.
Note: Wirepath™ Surveillance does not provide HTTPS certificates.
• Navigation: Log in as an administrator. From Home Screen, click "Config" button in top right corner, then click "Advanced" in
left column, then click "HTTPS" from the sub-menu that opens.
9.3.2.1.

Created Request

Subject Displays the subject content of the loaded certificate.
1
Date Displays the certificate creation date.
Content Click Content to display the content of the certificate. Click Remove to remove the certificate.
Remove Click Remove to remove the certificate.
9.3.2.2.

Installed Certificate

Subject Displays the subject content of the loaded certificate.
2
Date Displays the certificate creation date.
Content Click Content to display the content of the certificate. Click Remove to remove the certificate.
Remove Click Remove to remove the certificate.
9.3.2.3.

Connection Types

3 Select HTTP, HTTPS, or HTTP & HTTPS. We recommend that this be set to "HTTP & HTTPS" unless all PCs will have
the HTTPS certificate installed.
30
1
2
3