Camera Operation Setup; Focus, Zoom And Position; Using The Test Adapter - Wirepath Surveillance WPS-765-DOM-AH Installation Manual

WPS-765-DOM-AH Installation Manual

5. Camera Operation Setup

5.1. Focus, Zoom and Position

The lens of the camera has manual focus and zoom knobs for setting the correct
field of view and the gimbal may be rotated for tilt correction. Connect the test
adapter as described below to use a monitor at the camera location for viewing
adjustments.

5.2. Using the Test Adapter

Connect the red power
plug to a 12V DC, 500 mA
minimum power supply.
10
Focus
(Front)
Zoom
(Rear)
Rotate and Pivot Gimbal
(Loosen/tighten pivot setscrew
Test Adapter
as needed, not shown. )
Connection
Test Adapter Connector
Connect to the "Test
Adapter" plug above.
Use the center button to
navigate the OSD menu
structure.
Connect the yellow BNC
adapter to a video monitor to
view the menu.
Use a BNC-RCA adapter to connect
to a TV's yellow "Composite" input.