Managing Ipv6 Routes - Quanta Computer T5016-LB8D Use Manual

UANTA COMPUTER INC.

11.7.8 Managing IPv6 Routes

11.7.8.1 Configuring IPv6 Route Entry Configuration Page
Selection Criteria
Interface - Enter the unit, slot and port number for the Link-local IPv6 Next Hop Address. This field is
displayed only if Link-local Next-hop Selector is selected as Link-local.
Route Type - Specify if the Next Hop IPv6 Address is a Global IPv6 Address or a Link-local IPv6
Address or a Static-Reject IPv6 Address.
Configurable Data
IPv6 Network Prefix- Enter an IPv6 Network Address Prefix.
IPv6 Network Prefix Length - Enter the IPv6 Network Address Prefix Length.
Next Hop IPv6 Address - Enter an IPv6 Next Hop Address. If the Next Hop IPv6 Address specified
is a Link-local IPv6 Address, specify the Slot/Port for the Link-local IPv6 Next Hop Address.
Preference - Enter a Preference Value for the given route. It is optional. If left blank, the preference
value configured for the static route type is picked up for the route. The valid range is (1 to 255).
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
Cancel - Discards the changes made on the page and navigates back to the referring page.
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
1438/1523