Near Fuser Unit - MINOLTA-QMS ENord magicolor 3100 User Manual

Near Fuser Unit

5 "
Media that hasn't fully passed through the fuser contains unfused
toner that can dirty your hands, clothes, or other items. If you get toner
on your hands, wash them in cool water and neutral detergent. If you
get toner on your clothes, lightly dust them off as much as possible. If
toner remains on your clothes, use cool, not hot water, to rinse the
toner off, provided your clothing is washable.
1
Open the front cover (button B)
c, d.
2
Lift both fuser unit levers.
3
Remove the jammed media by
pulling it toward you.
4
Push both fuser unit levers
completely back.
If the jammed media was not visible
or if you had difficulty removing it,
repeat the instructions in "Near
Imaging Unit" on page 75.
76
ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500
2
Clearing Media Jams
B
1