MINOLTA-QMS ENord magicolor 3100 User Manual page 49

1
Slide open the media tray until it
stops.
2
Using two hands, lift it slightly to
remove it from the printer and place
it on a flat surface.
3
Remove any media remaining in
the tray.
4
If necessary, adjust the two side media guides and the end media guide to
the proper positions.
Attention
åã
The end media guide must be in direct alignment with the media
size mark in the bottom of the media tray. If the guide is not in the
proper hole, automatic paper size detection will not work.
Loading Media
ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500
43