MINOLTA-QMS ENord magicolor 3100 User Manual page 26

8
Gently rotate the the toner levers to
the locked (forward) position.
9
Pull the toner seal straight up.
Attention
Pulling the seal to the front or side
may damage the cartridge.
5 "
If the toner seal didn't pull
completely out because it was
pulled with too much force or it
was not pulled straight up while installing toner, call Technical Support.
Refer to the Service & Support Guide for the office nearest you.
10
Replace the top cover.
11
In the Operator Control/Consumables/
Item Replaced/<Color> Toner
(<Color> signifies black K, cyan C,
magenta M, or yellow Y) menu
choose Yes to reset the consumables
usage monitoring system.
5 "
You must manually reset the consumables usage monitoring
system to ensure accurate consumables monitoring.
12
After replacing toner, you may be required to print several pages before
the printer recognizes the "new" toner cartridge.
20
ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500
Replacing a Toner Cartridge