8
Grip the unit's levers, and gently lift it
out of the printer.
5 "
Dispose of the used fuser
according to your local
regulations.
9
Unpack a new fuser unit, lift up both
levers c, grip the fuser unit by the
levers, align it with the slots in the
printer, and slowly lower it d.
10
Completely push down both levers of
the fuser unit.
11
Lock the fuser unit by sliding the two
side locks backwards.
12
Close the covers c, d.
13
Continue with the media feed roller(s)
replacement. "How do I replace the
media feed roller(s)?" below.
Replacing the Fuser Unit
ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500
1
2
1
9