MINOLTA-QMS ENord magicolor 3100 User Manual page 57

b
For all input trays, on the control panel, press the Menu
select Operator Control/Multipurpose Size. Scroll to the required
transparency size and select it.
3
Fan a few transparencies.
5 "
Fanning a large number will
build up static electricity.
4
Load the media trays.
a
Put media face side down in the
upper or optional trays,
or
b
Open the multipurpose tray and adjust the media guides to the width
of the transparencies.
Attention
Improperly adjusted guides may cause poor print quality, media
jams, or printer damage.
c
Place the transparencies into
the multipurpose tray with the
printing-side up.
4
Print the transparencies.
Immediately remove the printed
transparencies from the output tray.
Loading Media
ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500
key and
51