MINOLTA-QMS ENord magicolor 3100 User Manual page 107

This message...
INVALID IMAGING
UNIT
MEDIA JAM DUPLEX
MEDIA JAM FEED
MEDIA JAM FUSER
MEDIA JAM
REGISTRATION
MEDIA TYPE
MISMATCH
MISMATCH JAM
Status, Error, and Service Messages
ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500
means...
The printer has
detected a
nongenuine
MINOLTA-QMS
imaging unit.
Media has jammed in
the duplexer.
Media has jammed
while being pulled
from the specified
tray.
Media has jammed
leaving the fuser
area.
Media has jammed in
front of the imaging
unit.
The media detected
in the tray doesn't
match the media size
or type setting.
Media has jammed
near the
transparency sensor.
do this...
To resume printing and
to prevent permanent
damage to your
MINOLTA-QMS printer,
replace the imaging unit
with a genuine
MINOLTA-QMS imaging
unit. If you are using a
genuine MINOLTA-QMS
imaging unit and still
receive this error,
contact Support. Refer
to the Service & Support
Guide or check
www.minolta-qms.com/
support.
Locate and remove the
jam. Open and close the
front door to reset the
printer.
Change the media in the
tray or change the
media size or type
setting .
Locate and remove the
jam. Open and close the
front door to reset the
printer.
101