MINOLTA-QMS ENord magicolor 3100 User Manual page 20

5
Remove the new imaging unit from
its protective bag.
6
Holding the imaging unit horizontally,
carefully pull the tabs straight out and
completely away from the unit.
Attention
Do not twist the tab as you
are pulling it. If any tab
doesn't pull completely
out (you must be able to
see the circle imprinted on
the end), the imaging unit
must be replaced.
7
Carefully remove the protective cover.
5 "
We strongly suggest that you
save the packaging materials
in case you ever need to move
or ship the printer.
8
Gently guide the imaging unit
straight into the printer, following the
arrows on the printer to seat the
pins.
Attention
You can damage the unit if it is
not aligned correctly.
14
ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500
Imaging unit
Replacing the Imaging Unit
transfer roller