12
Open the flap of each envelope immediately (before it cools) after the
envelope is delivered to the output tray.
5 "
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
How do I load and print glossy stock?
Refer to "Loading and Printing Media" on page 42.
How do I load and print labels?
5 "
Label printing is supported only from the multipurpose tray in letter or
A4 media sizes.
1
In the printer driver (Paper tab, Media Type option), select Label Stock.
2
Select the size of label.
a
Press the MP Size
and select it, or
b
On the control panel, press the Menu
Control/Multipurpose Size. Scroll to the required label size and
select it.
4
Load the label media face down in the multipurpose tray.
5
Adjust the media guides to the width of the label media.
6
Print the labels.
How do I load and print postcards?
5 "
Postcard printing is only supported from the multipurpose tray.
1
In the printer driver (Paper tab, Media Type option), select Postcard.
2
Select postcard.
a
Press the MP Size
b
On the control panel, press the Menu
Control/Multipurpose Size. Scroll to Postcard and select it.
4
Place the postcards on a flat surface, and flatten the corners by pressing
down them.
Loading Media
ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500
key and scroll to the required label size
key and select Operator
key and scroll to Postcard and select it, or
key and select Operator
49