MINOLTA-QMS ENord magicolor 3100 User Manual page 130

Installation
WARNING!
Your printer weighs approximately 77 lbs (35 kg) with consumables. Be
sure to have help when lifting and moving it.
ACHTUNG! Das Gewicht dieses Druckers beträgt mit
Verbrauchsmaterial ca. 34.5 kg. Bitte versuchen Sie niemals, den
Drucker alleine anzuheben oder zu transportieren.
1
Remove the HCIF from the shipping
carton, and place it on a table or flat
surface near the printer.
2
Remove any tape and packing mate-
rial from the HCIF.
5 "
We strongly suggest that you
save the packaging materials
in case you ever need to
move or ship the printer.
3
Slide open the top media tray until it stops.
4
Using two hands, lift it slightly to remove it from the printer.
5
Remove any shipping tape and spacers.
6
Repeat for the lower media tray.
7
Lock the two casters on the bottom
of the HCIF.
Attention
The casters must be locked so the
unit does not roll unexpectedly while
in operation.
8
Turn off the printer, and then
disconnect the power cord and all
interface cables from the printer.
124 High-capacity Input Feeder (HCIF)
ENord- Istedgade 37A - 9000 Aalborg - telefon 96333500