Setting Up The Access Point - ZyXEL Communications P-660R-T1 Support Notes

Setting up the Access Point

Mo st access points and clients have the ability to hold up to 4 WEP keys
simulta neously. You need to specify one of the 4 keys as default Key for data
encryption. To set up the Access Point, you will need to set the one of the following
parameters:
64-bit WEP key (secret key) with 5 characters
o
64-bit WEP key (secret key) with 10 hexadecimal digits
o
128-bit WEP key (secret key) with 13 characters
o
128-bit WEP key (secret key) with 26 hexadecimal digits
o
256-bit WEP key (secret key) with 29 characters
o
256-bit WEP key (secret key) with 58 hexadecimal digits
o
You can set up the Access Point by SMT or Web configurator
•
Setting up the Access Point from SMT Menu 3.5
P660HW-T1 hold up to 4 WEP Keys. You have to specify one of the 4 keys as default
Key which be used to encrypt wireless data transmission.
For example,
All contents copyright © 2005 ZyXEL Communications Corporation.
P-660 series Support Notes
126