ZyXEL Communications P-660R-T1 Support Notes page 28

Menu 3.2 - TCP/IP and DHCP Setup
DHCP Setup
DHCP= None
Client IP Pool Starting Address= N/A
Size of Client IP Pool= N/A
Primary DNS Server= N/A
Secondary DNS Server= N/A
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask=
RIP Direction= None
Version= N/A
Multicast= None
IP Policies=
Edit IP Alias= No
3. Configure for Internet setup in Menu 11-Remote Node Profile.
Menu 11.1 - Remote Node Profile
Rem Node Name= Bridge
Active= Yes
Encapsulation=
Multiplexing=
Service Name= N/A
Incoming:
Rem Login= N/A
Rem Password= N/A
Outgoing:
My Login= N/A
My Password= N/A
Authen= N/A
Key Settings:
Option Description
Select the correct Encapsulation type that your ISP supports. For example, RFC
Encapsulation
1483.
Multiplexing Select the correct Multiplexing type that your ISP supports. For example, LLC.
Router/ Bridge Disable routing mode and enable bridge mode, Bridge = Yes.
All contents copyright © 2005 ZyXEL Communications Corporation.
255.255.255.0
Route= None
Bridge= Yes
RFC 1483 Edit IP/Bridge= No
LLC-based Edit ATM Options= No
Edit Advance Options= No
Allocated Budget(min)= N/A
Period(hr)= N/A
Schedule Sets= N/A
Nailed-Up Connection= N/A
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= N/A
P-660 series Support Notes
Telco Option:
27