ZyXEL Communications P-660R-T1 Support Notes page 192

<set#> name>
default-permit
<forward|block>
icmp-timeout
<seconds>
udp-idle-timeout
<seconds>
connection-timeout
<seconds>
fin-wait-timeout
<seconds>
tcp-idle-timeout
<seconds>
pnc <yes|no>
log <yes|no>
rule <rule#>
All contents copyright © 2005 ZyXEL Communications Corporation.
P-660 series Support Notes
permit <forward|block>
active <yes|no>
protocol <0~255>
set
Edit whether a
packet is dropped
or allowed when it
does not match the
default set
Edit the timeout
for an idle ICMP
session before it is
terminated
Edit the timeout
for an idle UDP
session before it is
terminated
Edit the wait time
for the SYN TCP
sessions before it
is terminated
Edit the wait time
for FIN in
concluding a TCP
session before it is
terminated
Edit the timeout
for an idle TCP
session before it is
terminated
PNC is allowed
when 'yes' is set
even there is a rule
to block PNC
Switch on/off
sending the log for
matching the
default permit
Edit whether a
packet is dropped
or allowed when it
matches this rule
Edit whether a rule
is enabled or not
Edit the protocol
number for a rule.
191