ZyXEL Communications P-660R-T1 Support Notes page 99

4. There are two interfaces to apply the policy set, they are the LAN inte
3.2) and WAN interface (menu 11.3). It depends where the gateway speci
policy rule is located. If the gateway you specified is located on
apply the policy set in menu 3.2 (LAN interface). If the gateway you specifi
located on the remote WAN site you apply the policy set in men
interface).
Menu 3.2 - TCP/IP and DHCP Setup
DH P Setup C
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies= 1
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
Menu 11.3 - Remote Node Network Layer Options
IP Options:
Rem IP Addr:
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT = None
Address Mapping Set= N/A
All contents copyright © 2005 ZyXEL Communications Corporation.
Bridge Options:
Ethernet Addr Timeout(min)= N/A
P-660 series Support Notes
rface (menu
fied in the
the local LAN you
ed is
u 11.3 (WAN
98