ZyXEL Communications P-660R-T1 Support Notes page 46

Rem IP Addr = 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= N/A
NAT= Full Feature
Address Mapping Set=
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies=
Enter here to CONFIRM or ESC to CANCEL:
Step 1. Enter 11 from the Main Menu.
Step 2. Move th e cursor to the Edit IP field, press the [SPACEBAR] to toggle the
default No to Y es, then press [ENTER] to bring up Menu 11.3-Remote Node
Network Laye r Options.
The following t able describes the options for Network Address Translation.
Field
Network Address
Translation
Table: Applying NAT in Menu 4 and Menu 11.3
All contents copyright © 2005 ZyXEL Communications Corporation.
1
Options Description
When you select this option the SMT will use
Full Feature
Address Mapping Set 1 (Menu 15.1-see later for
further discussion).
None
NAT is disabled when you select this option.
When you select this option the SMT will us
Address Mapping Set 255 (Menu 15.1-see later for
further discussion). This option use basically
Many-to-One Overload mapping. Select Full
Feature when you require other mapping types. It
SUA Only
is a convenient, pre-configured, read only,
Many-to-On
purposes and helpful to people already familiar
with SUA in previous ZyNOS versions. Note that
there is also a Server type whose IGA is 0.0.0.0 in
this set.
P-660 series Support Notes
e mapping set, sufficient for most
e
45