Smt Related Command - ZyXEL Communications P-660R-T1 Support Notes

pktdump
update
dynamicrule
tcprst
icmp
dos
ignore

13. SMT Related command

No Command
sys bridge [on|off]
sys routeip [on|off]
sys hostname [hostname]
sys display
sys default
sys save
wan backup mechanism [dsl | icmp]
wan backup addr [index] [IP addr]
wan backup tolerance [number]
wan backup recovery [interval(sec)] Set recovery interval
wan backup timeout [number]
All contents copyright © 2005 ZyXEL Communications Corporation.
clear
rst
rst113
display
smtp
display
ignore
triangle
Description
Set system bridge on/off
Set system IP routing on/off
Set system name
Display hostname, routing/bridge mode
information in menu 1
Load All Default Settings Except LAN
and DHCP.
Save all the parameters which will
include menu1, menu 3.2 LAN, menu 4
or menu 11 WAN, menu 12 static route,
menu 15 NAT server set, menu 21 filter
sets, menu 22 SNMP, menu 24.11 remote
management and 3.5 Wireless LAN
Set wan backup mechanism to DSL link
or ICMP
Set wan ip address <index>
Set keepalive fail tolerance
Set ICMP timeout
P-660 series Support Notes
Clear firewall log count.
Dump the 64 bytes of dropped
packet by firewall
Update firewall
Set TCP reset sending on/off.
Set TCP reset sending for port 113
on/off.
Display TCP reset sending setting.
Set SMTP DoS defender on/off
Display SMTP DoS defender
setting.
Set if firewall ignore DoS in
lan/wan/dmz/wlan
Set if firewall ignore triangle route
in lan/wan/dmz/wlan
Comment
Menu 1
Menu 1
Menu 1
Display Menu 1
Menu 2
Menu 2
Menu 2
Menu 2
Menu 2
195