ZyXEL Communications P-660R-T1 Support Notes page 107

B andw dth i classes who need
U sage you want to reser
you want to limit the bandwidth of each class at t
that to meat the s
on the class.)
Go to AD VANC ED ->BW MGMT->Class Setup, select the interface on which you
w ould ke to setu the Class li p
Click the radio button besides the Root Class, then press
Key Settings:
Class Name
Give this class a name, for example, 'App'
Bandwidth
Configure the speed you would like to allocate to this class
Budget
Enter a number between 0 and 7 to set the priority of this class. The higher the
Priority
number, the higher the priority. The default setting is 3.
Check this box if you would like to let this class to borrow bandwidth from it's
parents when the required bandwidth is higher than the configured amount. Do
Bandwidth
not check this if you want to limit the bandwidth of this class at the configured
Borrowing
value.(Please note that you should also disable Maximize Bandwidth Usage
on the interface to meat the condition.)
Enable
Bandwidth
Check this to specify the traffic types via IP addresses/Port numbers.
Filter
All contents copyright © 2005 ZyXEL Communications Corporation.
more bandwidth than configure
ve ban dwidth for traffic that doe
econd c ondition, you should also
tree.
P-660 series Support Notes
d amount. Do not select this
s not match a bandwidth class
he co nfigured value. (Please note
disable bandwidth borro
'Add Su b-Class'
if
or
wing
106