Configuration for Wireless Station B
To configure Ad hoc mode on your ZyAIR B-100/B-200/B-30
please follow the following step.
1. Double click on the utility icon in your windows task bar the
your windows screen.
2. Select configuration tab.
3. Select Ad hoc from the operation mode pull down menu, fill you an SSID and
select a channel you want to use than press OK to apply.
4. Since there is no DHCP server to give the host IP you must first designate a static
IP f
or your station. From Windows Start select Control Panel >Network
Connec
tion>Wireless Network Connection.
All contents copyright © 2005 ZyXEL Communications Corporation.
P-660 series Support Notes
0 wireless NIC card
utility will pop up on
115