ZyXEL Communications P-660R-T1 Support Notes page 102

A tion= c Enable Dial-on-demand
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
Start date of this
Start Date example, if Start Date is 2000/10/02(Monday), but Monday setting in weekday
can be No.
If once is selected, all weekday settings will ne marked as N/A. After the rule
How Often
is completely, it will be deleted automatically.
The node will always keep up during the setting period. It is equivalent to
Forced On
diable the idel timeout.
The node will always keep doen during the setting period. The connected
Forced Down
remote node will be dropped.
Enable
The remote node accepts Di l-on-demand during this period.
Dial-On-Demand
Dis abl e The re
Dial-On-Demand connected nodes, it will be dropped after idle timeout and no triggered up.
Start Time/
Start Time and Duration of this schedule
Duration
•
Apply the schedule to the Remote node
Multiple scheduling rules can program in a Remote node, and they have priority. For
example, if we program the sets as 1,2,3,4 in remote node, then the set 1 will overrid
set 2,3,4. set 2 will override 3,4, and so on.
Rem Node Name= CHT
Active= Yes
Encapsulation= PPPoE
Multiplexing= LLC-based
Ser vice Name= N/A
Incoming:
R em Login= N/A
Rem Password= N/A
Outgoing:
My Login= cso@hinet.net
My Password= *******
All contents copyright © 2005 ZyXEL Communications Corporation.
schedule rule. It can be unmatched with weekday setting. For
a
mote node denies any demand dial during the period. For the existing
Menu 11.1 - Remote Node Profile
P-660 series Support Notes
.
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Edit Advance Options= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedule Sets= 1, 2, 3, 4
Nailed-Up Connection= No
Session Options:
e
101