Configuration Wireless Station To Infrastructure Mode - ZyXEL Communications P-660R-T1 Support Notes

P-660 series Support Notes
3 . Finished.

Configuration Wireless Station to Infrastructure mode

To configure Infrastructure mode on your ZyAI R B-100/B-200/B-300 wireless NIC
card please follow the following steps.
1. Double click on the utility icon in your windows task bar the utility will pop up on
your windows screen.
2. Select configuration tab.
3. Select Infrastructu re from the operation mode pull down menu, fill in an SSID or
leave it as any if you wish to connect to any AP than press Apply Change to take
effect.
4. Click on Site Survey tab, and press search all the available AP will be listed.
119
All contents copyright © 2005 ZyXEL Communications Corporation.