ZyXEL Communications P-660R-T1 Support Notes page 123

please enter a command "ipcon
address of your wireless client.
If you use SMT management, the MAC Address Filter configurations are as shown
below.
Enter the MAC Addresses of
association fro m these cards.
Menu 3.5.1 - WLAN MAC Address Filter
Active= Yes
Filter Action= Allowed Association
------------------------------------------------------------------------------
1= 11:11:11:11:11:11
2= 00:00:00:00:00:00 14= 00:00:00:00:00:00 26= 00:00:00:00:00:00
3= 00:00:00:00:00:00 15= 00:00:00:00:00:00 27= 00:00:00:00:00:00
4= 00:00:00:00:00:00 16= 00:00:00:00:00:00 28= 00:00:00:00:00:00
5= 00:00:00:00:00:00 17= 00:00:00:00:00:00 29= 00:00:00:00:00:00
6 = 0 :00:00:00:00:00 18= 00:00:00: 0
7 = 0 :00:00:00:00:00 0
8 = 0 :00:00:00:00:00 20 0
9= 00:00:00:00:00:00 21= 00:00:00:00:00:00
10= 00:00:00:00:00:00 22= 00:00:00:00:00:00
11= 00:00:00:00:00:00 23= 00:00:00:00:00:00
12= 00:00:00:00:00:00 24= 00:00:00:00:00:00
------------------------------------------------------------------------------
ENTER here to CONFIRM or ESC to CANCEL:
Key Settings:
Option Descriptions
Allow or block association from MAC addresses contained in this list. If Allow Association
is selected in this field, hosts with MAC addresses configured in this list w
Filter Action
associate with AP. If Deny Association is selected in this field, hosts with MAC addresses
configured in this list will be blocked.
MAC Address
This field specifies those MAC Addresses that you want to add in the list.
All contents copyright © 2005 ZyXEL Communications Corporation.
fig /all" after DOS prompt to get the MAC (physical)
wireless cards in the filter set to allow or deny
13= 00:00:00:00:00:00 25= 00:00:00:00:00:00
00:00:00 30= 00:00:00:00:00:00
19= 00:00:00:00:00:00 31= 00:00:00:00:00:00
= 00:00:00:00:00:00 32= 00:00:00:00:00:00
P-660 series Support Notes
ill be allowed to
122