ZyXEL Communications P-660R-T1 Support Notes page 59

Step 3:
Now we configure all other incom
from Menu 15.2.2 - NAT
case).
Menu 15.2.2 - NAT Server Setup
Rule Start Port No. End Port No. IP Address
---------------------------------------------------
1. Default
2. 80
3. 25
4. 0
5. 0
6. 0
7. 0
8. 0
9. 0
10. 0
11. 0
12. 0
Press ENTER to Confirm or ESC to Cancel:
4. Support Non NAT Friendly Applications
Some servers providing Internet applications such as some mIRC servers do not allow
users to login using the same IP address. In is case it is better to use Many-to-Many
No Overload or One-to-O
using a unique global IP
All contents copyright © 2005 ZyXEL Communications Corporation.
ing traffic to go to our web server aand mail server
Server Setup (not Set 1, Set 1 is used for SUA Only
Default 0.0.0.0
80 192.168.1.20
25 192.168.1.20
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
th
ne NAT mapping types, thus each user login to the server
address. The following figure illustrates this.
P-660 series Support Notes
58