ZyXEL Communications P-660R-T1 Support Notes page 50

place until this action is taken. Be careful when ordering your rules as each rule is
executed in turn beginning from the first rule.
Selecting Edit in the Action field and then selecting a rule brings up the following
menu, Menu 15.1.1.1-Address Mapping Rule in which you can edit an individual
rule and configure the Type, Local and Global Start/End IPs displayed in Menu
15.1.1.
Menu 15.1.1.1 - - Rule 1
Type: One-to-One
Local IP:
Start= 0.0.0.0
End = N/A
Global IP:
Start= 0.0.0.0
End = N/A
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this screen.
Field Description
Press [SPACEBAR] to toggle through a total o
Type These are the mapping types discussed abo
type. Some examples follow to clarify
Start This is the starting local IP address (ILA)
L ocal
This is the ending local IP addres
I P
End all local IPs, then put the Start IP
as 255.255.255.255. This field is
This is the starting global IP addr
Start
dynamic IP, enter 0.0.0.0 as the G
G lobal
I P
This is the ending global IP ad
End
is N/A for One-to-One, Many-to
Note: For all Local and Global IPs, the End IP address must begin after the IP Start
address, i.e., you cannot have an End IP address begi
All contents copyright © 2005 ZyXEL Communications Corporation.
P-660 series Support Notes
f 5 types.
ve plus a server
these a little more.
s (ILA). If the rule is for
as 0.0.0.0 and the End IP
N/A for One-to-One type.
ess (IGA). If you have a
lobal Start IP.
dress (IGA). This
field
-One and Server types.
nning before the Start IP address.
Option/Example
One-to-One
Many-to-One
Many-to-Many Overload
Many-to-Many No
Overload
Server
0.0.0.0
255.255.255.255
0.0.0.0
200.1.1.64
49