ZyXEL Communications P-660R-T1 Support Notes page 197

wan backup save
wan backup display
wan tredir active [on|off]
wan tredir ip [IP addr]
wan tredir metric [number]
wan tredir save
wan tredir display
lan index [1|2|3]
1: Select main LAN Interface
2: Select IP Alias 1
3: Select IP Alias 2
lan active [on|off]
lan ipaddr [address] [subnet mask]
lan rip [none|in|out|both]
[rip1|rip2b|rip2m]
lan multicast [none|igmpv1|igmpv2] Set LAN IP multicast mode
lan filter [incoming|outgoing]
[tcpip|generic] [set#1] [set#2] [set#3]
[set#4]
lan dhcp mode [server|relay|none]
lan dhcp server dnsserver [pri dns]
[sec dns]
lan dhcp server pool [start-address]
[num]
lan dhcp server gateway [IP address] Set DHCP gateway
lan dhcp server netmask [subnet
mask]
All contents copyright © 2005 ZyXEL Communications Corporation.
Save wan backup related parameters
Display wan backup configurations
Set traffic redirect on/off
Set traffic redirect gateway IP address
Set traffic redirect metric
Save traffic redirect related parameters
** Have to apply ?an backup
save?command thereafter
Display traffic redirect configurations
Select a LAN interface to edit
Turn on or off on IP Alias Interface
Set LAN IP address and subnet mask
Example:
> lan ipaddr 192.168.1.1 255.255.255.0
Set LAN IP RIP mode and RIP version,
if you choose none in the first parameter,
the second parameter is also necessary
Set LAN filter to be incoming/outgoing
or protocol /device and the filter set
could be 1-12, 0 means empty
Example:
Lan filter incoming tcpip 1 0 0 0
Set DHCP mode to
be?erver? ?elay? ?one?o:p>
Set primary and secondary LAN DNS
server
Set DHCP start address and pool size
Set DHCP subnet mask
P-660 series Support Notes
Menu 2
Menu 2
Menu 2.1
Menu 2.1
Menu 2.1
Menu 2.1
Menu 2.1
Menu 3.2
Menu 3.2.1
Menu 3.2
Menu 3.2
Menu 3.2
Menu 3.1
Menu 3.2
Menu 3.2
Menu 3.2
Menu 3.2
Menu 3.2
196