ZyXEL Communications P-660R-T1 Support Notes page 31

2. Configure a LAN IP for the P-660 and the DHCP
Ethernet Setup. The settings except of the DNS addresses sh
pre-configured defaults.
3. Configure for Internet setup in Menu 4-Internet Access Setup.
All contents copyright © 2005 ZyXEL Communications Corporation.
Contact Person's Name=
Domain Name=
Edit Dynamic DNS= No
Route IP= Yes
Bridge= No
Menu 3.2 - TCP/IP and DHCP Setup
DHCP Setup
DHCP= Server
Client IP Pool Starting Address=
Size of Client IP Pool=
Primary DNS Server= 168.95.1.1
Secondary DNS Server= 168.95.192.1
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask=
RIP Direction=
Version= RIP-1
Multicast= None
IP Policies=
Edit IP Alias= No
Menu 4 - Internet Access Setup
ISP's Name= CHT
Encapsulation=
Multiplexing=
VPI #= 0
VCI #= 33
ATM QoS Type= CBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
My Login= cso@hinet.net
P-660 series Support Notes
settings in Menu 3.2-TCP/IP
own below are the
192.168.1.33
6
255.255.255.0
Both
PPPoE
LLC-based
30