ZyXEL Communications P-660R-T1 Support Notes page 104

IGMP (Internet Group Management Protocol) is the protocol used to support
multicast groups. The latest version is version 2 (see RFC2236). IP hosts use IGMP to
report their multicast group membership to any im
so the multicast routers can decide if a multicast packet needs to be forwarded. At
start up, the P-660 queries all dir
membership.
After that, the P-660 updates the information by periodic queries. The P-660
implementation of IGMP is also compatible with version 1. The multicast setting c
be turned on or off on Ethernet and remote nodes.
•
IP Multicast Setup
Enable IG MP in P-660's LAN in menu 3.2:
Menu 3.2 - TCP/IP and DHCP Setup
DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= IGMP-v2
I P Policies=
E dit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
Enable IGMP in P-660's remote node in menu 11.3:
Menu 11.3 - Remote Node Network Layer Options
IP Options:
Rem IP Addr:
Rem Subnet Mask= 0.0.0.0
All contents copyright © 2005 ZyXEL Communications Corporation.
ectly connected networks to gather group
Bridge Options:
Ethernet Addr Timeout(min)= N/A
P-660 series Support Notes
mediate-neighbor multicast routers
an
103