Wireless Application Notes (For P-660Hw Only); Configure A Wireless Client To Ad Hoc Mode; Ad Hoc Introduction; Configuration For Wireless Station A - ZyXEL Communications P-660R-T1 Support Notes

Wireless Application Notes (For P-660HW Only)

1. Configure a Wireless Client to Ad hoc mode

•

Ad hoc Introduction

•

Configuration for wireless station A

•
Configuration for wireless station B
Ad hoc Introduction
What is Ad Hoc mode ?
Ad hoc mode is a wireless network consists of a number of stations without access
points. Without using an access point or any connection to a wired network, a client
unit in Ad hoc operation mode can communicate directly to other client units just as
using a cross over Ethernet cable connecting 2 host together via a NIC card for direct
connection when configured in Ad hoc mode without an access point being present.
Ad hoc operation is ideal for small networks of no more than 2-4 computers. Larger
networks would require the use of one, or perhaps severa
Configuration for Wireless Station A
To configure Ad hoc mode on your ZyAIR B-100/B-200/B-300 wireless NIC card
please follow the following step.
1. Double click on the utility icon in your windows task bar the utility will pop up on
your windows screen.
All contents copyright © 2005 ZyXEL Communications Corporation.
P-660 series Support Notes
l, access points.
112