ZyXEL Communications P-660R-T1 Support Notes page 65

Menu 3.1:
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Menu 11.1:
Rem Node Name= LAN
Active= Yes
Encapsulation= PPP
Incoming:
Rem Login= test
Rem Password= ********
Outgoing:
My Login= testt
My Password= *****
Authen= CHAP/PAP
Press ENTER to Confirm or ESC to Cancel:
Menu 11.5:
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
SMT will also prevent you from enter
to the device filters field in Menu 3
protocol filters field. Even though SM
entered in ZyNOS, it is unable to res
All contents copyright © 2005 ZyXEL Communications Corporation.
Menu 11.1 - Remote Node Profile
Route= IP
Bridge= No
Edit PPP Options= No
Rem IP Addr= ?
Edit IP/IPX/Bridge= No
Session Options:
Edit Filter Sets= Yes
ing a protocol filter set configured in Menu 21
.1, 11.5, or entering a device filter set to the
T will prevent the inconsistency from being
olve the intermixing problems existing in the
P-660 series Support Notes
64