ZyXEL Communications P-660R-T1 Support Notes page 82

Hide thumbs Also See for P-660R-T1:
Table of Contents

Advertisement

Without DDNS, we always tell the users to use the WAN IP of the P-660 to access the
internal server. It is inconvenient for the users if this IP is dynamic. With DDNS
supported by the P-660, you apply a DNS name (e.g
server (e.g., Web server) from a DDNS server. The outside users can always access
the web server using the www.zyxel.com.tw regardless of the WAN IP of the P-660
When the ISP assigns the P-660 a new IP, the P-660 must inform the DDNS server
the chang
e of this IP so that the server can update its IP-to-DNS entry. Once the
IP-to-DNS table in the DDNS server is updated, the DNS name for your web server
(i.e., w
ww.zyxel.com.tw) is still usable.
The DDNS server stores password-protected email addresses with IPs and hostnames
and accep
ts queries based on email addresses. So, there must be an email entry in the
P-660 menu 1.
The DDNS servers the P-660 supports currently is WWW.DYNDNS.ORG where you
apply the DNS from and update the WAN IP to.
• Set
up the DDNS
1. Before configuring the DDNS settings in the P-660, you must register an
a
ccount from the DDNS server such as WWW.DYNDNS.ORG first. After the
registration, you have a hostname for your internal server and a password
using to update the IP to the DDNS server.
2.
Toggle
'Configure Dynamic DNS' option to 'Yes' and press ENTER for
configuring the settings of the DDNS in menu 1.1.
Menu 1 - Genera l Setup
System Name= P-660
Location=
Contac
t Person's Name=
Domain Name=
Edit Dyn
amic DNS= Yes
Route IP= Yes
Bridge= No
All contents copyright © 2005 ZyXEL Communications Corporation.
P-660 series Support Notes
., www.zyxel.com.tw) for your
.
81

Advertisement

Table of Contents
loading

Table of Contents