Setup Prestige Vpn - ZyXEL Communications P-660R-T1 Support Notes

P-660 series Support Notes
2. S u et p Prestige VPN
Using a web browser, login Prestige by giving the LAN IP address of Prestige in URL
fiel D d. efault LAN IP is 192.168.1.1, de fault password to login web configurator is
123 4.
Go to A dvanced -> VPN
Select Negotiation Mode to Main, as we configured in Sentinel.
Local I P, Address Type is Subnet, Addr ess Start is 0.0.0.0 End/Subnet Mask is
0.0.0.0
Remote IP, lea ve the field as defalut.
My IP Addr is the LAN IP of Prestige.
Secure Gateway IP Addr is 0.0.0.0.
Select Encapsulation Mode to Tunnel.
Check the ESP check box. (AH can not be used in SUA/NAT case)
Select Encryption Algorithm to DES and Authentication Algorithm to MD5, as
we configured in Sentinel.
Enter the key string 12345678 in the Preshared Key text box, and click Apply.
Press Advanced button to set IKE phase 1 and phase 2 parameters.
Telnet or console connect to Prestige SMT menu 24.8, and then issue this command,
"ipsec route lan on". Please note that, if you simply issue this command in Menu
24.8, this will be lose efficacy after rebooting,
to make it function all the time, please save this command into Prestige by the
following CI comm and in Menu 24.8,
a. please type "sys edit autoexec.net"
b. press "i", then type "ipsec route lan on"
c. press "x", to save the configuration.
144
All contents copyright © 2005 ZyXEL Communications Corporation.