Date And Time - ZyXEL Communications ZyWall USG20-VPN User Manual

Figure 368 Configuration > System > USB Storage
The following table describes the labels in this screen.
Table 230 Configuration > System > USB Storage
LABEL
Activate USB
storage service
Disk full warning
when remaining
space is less
than
Apply
Reset

30.4 Date and Time

For effective scheduling and logging, the USG system time must be accurate. The USG's Real Time
Chip (RTC) keeps track of the time and date. There is also a software mechanism to set the time
manually or get the current time and date from an external server.
To change your USG's time based on your local time zone and date, click Configuration > System
> Date/Time. The screen displays as shown. You can manually set the USG's time and date or
have the USG get the date and time from a time server.
Chapter 30 System
DESCRIPTION
Select this if you want to use the connected USB device(s).
Set a number and select a unit (MB or %) to have the USG send a warning message when
the remaining USB storage space is less than the value you set here.
Click Apply to save your changes back to the USG.
Click Reset to return the screen to its last-saved settings.
USG20(W)-VPN Series User's Guide
540