Dynamic Dns: Add/Edit - ZyXEL Communications SBG5500 Series User Manual

Figure 58 Configuration > WAN / Internet > Dynamic DNS
The following table describes the labels in this screen.
Table 19 Configuration > WAN / Internet > Dynamic DNS
LABEL
Dynamic DNS
Add
Edit
Remove
Multiple Entries Turn On
Multiple Entries Turn Off
#
Status
Profile Name
DDNS Server
Domain Name
Interface
Current IP
Result
Time

5.7.1 Dynamic DNS: Add/Edit

Click Add or select an existing dynamic DNS and click Edit in the Dynamic DNS screen to configure it.
Chapter 5 WAN/Internet
DESCRIPTION
Click this to add a dynamic DNS.
Select an entry and click Edit to modify the dynamic DNS's settings.
To remove an Dynamic DNS, select it and click Remove.
Select one or more dynamic DNS entries and click this to enable them.
Select one or more dynamic DNS entries and click this to disable them.
This is the number of an individual dynamic DNS.
This field displays whether the dynamic DNS is active or not. A green ON button
signifies that this dynamic DNS is active. A gray OFF button signifies that this dynamic
DNS is not active.
This field displays the descriptive profile name for this entry.
This shows your Dynamic DNS service provider.
This shows the domain name assigned to your SBG by your Dynamic DNS provider.
This field displays the interface to use for updating the IP address mapped to the
domain name.
This shows the IP address your Dynamic DNS provider has currently associated with
the Profile Name.
Accept - displays when DDNS profile was updated to server successfully.
Not Accept - displays when DDNS profile is there was a problem during sync process.
Login Fail - displays when a DDNS profile is incorrect and it failed
This shows the last time the IP address the Dynamic DNS provider has associated with
the profile name was updated.
SBG5500/3310 Series User's Guide
78