Table of Contents
Advertisement
g WARNING
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
g WARNING
reconnected to ensure that the washer is properly grounded.
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
1. WALL RECEPTACLE POLARITY CHECK .
POWER CORD
(Fused with
13 AMP Fuse)
2. POWER CORD TO CONTROL HOOD, CONTROL HOOD TO THE CONTROL PANEL FRAME.
CONTROL
HOOD REAR
PANEL
POWER CORD
EARTH WIRE
CONTROL
HOOD WIRE
HARNESS
EARTH WIRE
(Ground)
37989
SECTION I
Grounding
SCREW
(Ground)
230 VOLTS
0 VOLTS
50 HZ
230 VOLTS
50 HZ
W355SE3A
Figure 1
WASHER
NUT
Figure 2
5
NOTE: Have a
qualified electrician
check polarity of wall
receptacle. If a voltage
reading is measured
other than that
illustrated, the
qualified electrician
should correct the
problem.
WASHER
NUT
NUT
W361SE3A
W003
W003
Advertisement
Table of Contents
