g WARNING
To reduce the risk of electric shock, fire, explosion, serious injury or death:
Disconnect electric power to the washer before servicing.
Never start the washer with any guards/panels removed.
Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
PUMP
ASSEMBLY
PUMP
LEGS
MOTOR
EMBOSSES
MOTOR
ASSEMBLY
37989
PUMP MOUNTING
SCREWS
Figure 19
19
W003
REAR
PUMP LEG
(Must be located
between belt when
installing pump
assembly)
MOTOR
SHAFT
(Clean shaft and apply
a thin film of lubricant,
No. 03637P)
MOTOR
EMBOSS
W272SE3A