Table of Contents
Advertisement
g WARNING
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
j. Reinstall cabinet top.
k. Remove control panel, reconnect pressure
hose to pressure switch. Then reinstall control
panel.
l. Reinstall washer front panel.
m.Reconnect washer power cord and open
water supply valves.
NOTE: Washer must be run through a complete
cycle to make sure it is operating properly.
PRESSURE
HOSE
37989
PRESSURE
BULB
Figure 48
TAPE
47
W003
W366SE3A
Advertisement
Table of Contents
