Drive Belt Inspection; Drive Belt Replacement; Drive Pulley - KYMCO SUPER8 50 2T Service Manual

8
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
DRIVE BELT
Remove the left crankcase cover.
INSPECTION
Check the drive belt for cracks, separation
or abnormal or excessive wear.
Measure the drive belt width.
Service Limit:
16.5mm replace if below
＊
Use specified
replacement.
REPLACEMENT
Remove the ten left crankcase cover bolts
and left crankcase cover. ( 8-4)
Hold the clutch outer with the universal
holder and remove the 10mm clutch outer
nut and clutch outer.
Hold the drive pulley with the holder and
remove the 12mm drive face nut.
Remove the starting ratchet.
Remove the drive pulley face.
8-7
genuine parts for
Clutch Outer
Universal Holder
Ratchet
Drive Face Nut
SUPER8 50 2T
Clutch Outer Nut
Drive Face