Drive Belt Inspection; Drive Belt Replacement - KYMCO SUPER 9 50 Service Manual

7
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
DRIVE BELT
Remove the left crankcase cover.
INSPECTION
Check the drive belt for cracks, separation
or abnormal or excessive wear.
Measure the drive belt width.
Service Limit:
SH10DA: 17mm replace if below
SF10DA: 17mm replace if below
＊
Use specified genuine parts for replace-
ment.
REPLACEMENT
Remove the nine left crankcase cover bolts
and left crankcase cover. ( 7-2)
Hold the clutch outer with the universal
holder and remove the 14mm clutch outer
nut and clutch outer.
Hold the drive pulley with the holder and
remove the 17mm drive face nut.
Remove the starting ratchet.
Remove the drive pulley face.
Clutch Outer
Universal Holder
Ratchet Drive Face
Drive Face Nut
SUPER 9 50
Clutch Outer Nut
7-6