5022-xxx
Front access door cover assembly removal
See Front access door cover assembly for the part number for the models you need on
1.
Remove the paper tray.
2.
Remove the right cover. See
3.
Disconnect the transfer belt cable (A).
4.
Press the two tabs (B) on either side of the transfer belt assembly, and lift out the transfer belt assembly.
Note: Leave the photoconductor units on the transport belt when removing.
Warning: To avoid damaging the photoconductor drum, hold the photoconductor units by their handle and
place the photoconductor units on a clean surface. Never expose the photoconductor units to light for a
prolonged period of time. See
information.
Model C52x
4-16
Service Manual
"Right cover removal" on page
"Handing the photoconductor unit" on page 4-2
A
B
page
7-3.
4-26.
for additional
Model C53x
A
B