Transparency Print Quality Is Poor; Uneven Print Density; Embedded Web Server Does Not Open - Lexmark 6500e User Manual

Troubleshooting

Transparency print quality is poor

Try one or more of the following:
C
HECK THE TRANSPARENCIES
Use only transparencies that meet the printer specifications.
C P T
HECK THE APER YPE SETTING
Make sure the Paper Type setting is set to Transparency:
1
From the scanner control panel Paper menu, check the Paper Type setting.
2
Before sending the job to print, specify the correct type setting:
•
For Windows users, specify the type from Print Properties.
•
For Macintosh users, specify the type from the Print dialog.

Uneven print density

ABCDE
ABCDE
ABCDE
M
AKE SURE THERE IS NO DEFECTIVE OR WORN PRINT CARTRIDGE
Replace the worn or defective print cartridge.

Embedded Web Server does not open

Try one or more of the following:
C
HECK THE NETWORK CONNECTION
Make sure the printer, scanner, and computer are turned on and connected to the same network.
C
HECK ADDRESS ENTERED INTO THE
•
Depending on the network settings, you may need to type "https://" instead of "http://" before the
scanner IP address to access the Embedded Web Server. For more information, contact your system support
person.
•
Make sure you have the correct scanner IP address.
W
EB BROWSER
291