Understanding the printer menus
Use
Annotations
Do Not Print
Print
PostScript menu
Use
Print PS Error
On
Off
Lock PS Startup Mode
On
Off
Font Priority
Resident
Flash/Disk
PCL Emul menu
Use
Font Source
Resident
Disk
Download
Flash
All
Font Name
Courier 10
To
Print annotations in a PDF.
Note: Do Not Print is the factory default setting.
To
Print a page containing the PostScript error.
Note: Off is the factory default setting.
Disable the SysStart file.
Note: Off is the factory default setting.
Establish the font search order.
Notes:
•
Resident is the factory default setting.
•
This menu item is available only when a formatted, working flash memory
option card or scanner hard disk is installed and is operating properly.
•
Make sure the flash memory option or scanner hard disk is not
read/write‑, write‑, or password‑protected.
•
Job Buffer Size must not be set to 100%.
To
Specify the set of fonts used by the Font Name menu.
Notes:
•
"Resident" is the factory default setting. This shows the factory default
set of fonts downloaded in the RAM.
•
"Flash" and "Disk" settings show all fonts resident in that option.
•
The flash option must be properly formatted and cannot be read/write‑,
write‑, or password‑protected.
•
"Download" shows all the fonts downloaded in the RAM.
•
"All" shows all fonts available to any option.
Identify a specific font and the option where it is stored.
Note: Courier 10 is the factory default setting. Courier 10 shows the font
name, font ID, and the storage location in the scanner. The font source
abbreviation is R for Resident, F for Flash, K for Disk, and D for Download.
230