Cable Routing - Invacare Storm4 Max Service Manual

SERVICE MANUAL
7.3.6

Cable routing

Requirements:
 4 mm Allen key
 oblique pliers
 cable ties

Remove the rear and the centre cover as described in chapters 7.1.1 and 7.1.2 .
 Guide the cables inside of the cover over the cable link (1).
 Secure the cables with the cable clamps (2).

The motor cables are fitted with protection covers (2) and are guided out of the front cover
through recesses on the side.

Cables that lead to the seat (upper actuator module, remote, headlight), are guided out of the
front cover through an upper left recess (3).

Make sure the cable has enough play so that all movable parts can move freely without
stretching, clamping or abrading the cable.

Lay the cables in the same way under the seat and to the remote. Fasten the cables with the
prescribed cable clamps or cable ties respectively.
52
® 4
Invacare - STORM MAX